Grain Bill & Mash Calculator
A whiskey starts as a grain bill, and the bill decides almost everything that follows: how strong the wash will be, how much spirit it can yield, and whether the mash can even convert its own starch. Pick up to six grains and their weights, and this calculator works out the original gravity, the potential alcohol, the colour, and — the number most calculators skip — whether the bill carries enough diastatic power to convert itself. The defaults are a bourbon-style bill: mostly flaked maize, with 6-row malt and malted rye doing the enzyme work.
Not enough enzymes. The weighted diastatic power is below the 30 °Lintner minimum, so this bill probably will not convert on malt enzymes alone. Add more malted grain (6-row or distillers malt), or add liquid enzymes.
How the numbers are worked out
Gravity from points. Every grain has a maximum extract, published as points per pound per gallon (PPG): the gravity points one pound of it would add to one gallon of water at perfect efficiency. A pound of table sugar is the yardstick at 46 points; a base malt lands near 37, which is just its ~80% extract share of that yardstick. To work in kilograms and litres, each PPG figure is multiplied by 8.345, the weight and volume conversions combined. The calculator adds up every row's points, takes your mash efficiency as a share of the maximum, divides by the batch volume, and that is the OG.
Colour from Morey. Colour starts as malt colour units: each grain's weight in pounds times its Lovibond colour, added up and divided by the gallons of wash. But light absorption is not linear — doubling the dark grain does not double the darkness — so the Morey equation bends the total with a power below one (SRM = 1.4922 × MCU0.6859). The result is in SRM; EBC is just SRM × 1.97. The swatch beside the result shows that SRM on screen, mapped through the standard SRM colour chart — pale straw at SRM 2 down to black past SRM 40 — with the shades between chart points blended. Screens vary, so treat the swatch as an impression, not a measurement. And treat the colour as an estimate of the wash, not the finished spirit: distillation strips colour out, and the barrel puts its own back in.
Diastatic power and the 30 °Lintner rule. Malted grain carries the enzymes that turn starch into fermentable sugar, and diastatic power (DP) measures how much enzyme a malt brings, in degrees Lintner. Flaked grains were never malted, so they bring starch and no enzymes at all. The mash as a whole needs a weight-averaged DP of at least about 30 °Lintner to convert itself — below that, the starch sits unconverted and the yield collapses. That is why a corn-heavy bourbon bill leans on 6-row barley or distillers malt: their high DP covers the enzyme-free corn. If the verdict below comes back short, add malt or use liquid alpha-amylase and glucoamylase instead.
Spirit yield. Potential ABV comes from the gravity drop, (OG − FG) × 131.25, the same linear estimate the Wash ABV tool uses. Multiply by the batch volume for the theoretical pure alcohol, then apply your recovery and collect it at 65% ABV for the estimated spirit volume. It is a planning figure: real yields depend on the cut points, the still, and how the fermentation actually finished.