Wash ABV from OG & FG
Take a hydrometer reading before you pitch the yeast (original gravity, OG) and another when fermentation is done (final gravity, FG). The drop between them is sugar that became alcohol and CO₂ — and that drop tells you the wash strength.
Which number do I trust?
Linear: ABV = (OG − FG) × 131.25. Simple and fine for weak washes, but it assumes the gravity drop maps to alcohol in a straight line — which it doesn't. Above about 7% ABV (OG above ~1.070) it starts reading low, and by OG 1.100 it under-reads by a full percentage point.
Hall: ABV = 76.08 × (OG − FG) ÷ (1.775 − OG) × (FG ÷ 0.794). Michael Hall's 1995 formula (Zymurgy, “Brew by the Numbers”) allows for the way ethanol's density and the sugar-to-alcohol yield change as gravity climbs. It matches direct ethanol measurements to roughly 0.1% ABV across the normal range. For anything over ~7%, use the Hall number.
Both formulas assume the whole gravity drop was sugar turning into ethanol. Unfermentable sugars, a stuck ferment, or sugar added after the OG reading will all throw them off. And correct warm hydrometer readings to the calibration temperature first — see the Temperature Correction tool.