Yeast & Enzyme Tables
Two ingredients decide how a wash turns out before the still is ever lit: the yeast that does the fermenting and the enzymes that prepare its food. The yeast table below pulls ten strains a distiller is likely to reach for, with the figures that matter — how much of the sugar each strain eats, the temperatures it works in, and the alcohol level that stops it. The enzyme table covers the three enzymes that do real work in a distillery: the pair that turn grain starch into fermentable sugar, and the one that frees juice from fruit. Every figure comes from the manufacturer's own data sheet or product page where one exists; where a maker publishes no figure, the table says so rather than guessing. A short hop table closes the page, for the rare wash where hops earn a mention.
Yeast strains
| Strain | Supplier | Type | Attenuation % | Temperature range °C | Alcohol tolerance % ABV | Notes |
|---|---|---|---|---|---|---|
| Lalvin EC-1118 | Lallemand | Wine | not published | 10–30 | up to 18 | Neutral, fast fermenter; the default all-rounder for sugar washes and fruit. |
| Lalvin K1-V1116 | Lallemand | Wine | not published | 10–35 | up to 18 | Floral esters when fermented cool; the widest temperature range here. |
| DistilaMax DS | Lallemand | Distiller's | not published | 25–33 | not published | Neutral-spirit strain for grain and sugar washes. |
| DistilaMax HT | Lallemand | Distiller's | not published | 25–37 | above 16 | Thermotolerant; suits hot ferments and high-gravity mashes. |
| DADY (Distillers Active Dry Yeast) | Fermentis / Red Star (Lesaffre) | Distiller's | not published | 30–32 | not published | Grain-mash workhorse; sold as Red Star DADY. |
| Still Spirits Classic 8 | Still Spirits | Turbo | not published | 18–30 | up to 20 | Yeast plus nutrients; the 8 kg sugar recipe runs cooler (16–25 °C). |
| Alcotec 48 | Hambleton Bard | Turbo | not published | 20–30 | up to 20 | 14% in 48 hours, or 20% in about 5 days. |
| SafAle US-05 | Fermentis | Ale | 78–82 | 18–26 | 9–11 | Clean American ale yeast; good for grain washes at modest strength. |
| WLP099 Super High Gravity Ale | White Labs | Ale | 80–100 | 18–20 | up to 25 | Liquid strain; needs step-feeding to reach 25%. |
| Baker's yeast (active dry) | Various (e.g. Fleischmann's / AB Mauri) | Baker's | not published | 24–35 | ~5–8 | Cheap and vigorous; ranges from baking literature, not a data sheet. |
Enzymes
| Enzyme | Function | Temperature range | pH range | Typical dose | Notes |
|---|---|---|---|---|---|
| Alpha-amylase | Liquefaction: cuts long starch chains into shorter dextrins and thins the mash. | 45–95 °C | 5.5–6.5 | 0.13–0.22 mL/kg grist | Termamyl SC DS (Novozymes); optimum about 85–95 °C, working pH 3.5–8.5. |
| Glucoamylase | Saccharification: trims dextrins down to glucose the yeast can ferment. | 30–35 °C | 3.5–4.5 | 0.046–0.066% w/w of raw material | Spirizyme Fuel in simultaneous saccharification and fermentation; AMG 300 L optimum 75 °C for standalone saccharification. |
| Pectinase | Breaks down pectin in fruit; boosts juice yield and helps the wash clear. | 20–50 °C | 3.0–5.0 | 1.5–3.0 g/100 kg fruit | Lallzyme EX-V (Lallemand); optimum about 45–50 °C, still works down to 12 °C. |
Hops
Hops are marginal for distilling — their bitterness and aroma mostly stay behind in the boiler — but a few washes, notably hopped whiskey-style mashes, do use them. Typical alpha-acid ranges for eight common varieties, from the USDA Hop Variety Manual:
| Variety | Typical alpha acids % |
|---|---|
| Ultra | 2.0–3.5 |
| Saaz (U.S.) | 3.0–4.5 |
| Cascade | 4.5–7.0 |
| Cluster | 5.5–8.5 |
| Centennial | 9.5–11.5 |
| Citra | 11.0–13.0 |
| Chinook | 12.0–14.0 |
| Apollo | 15.0–19.0 |
Notes on the numbers
“Not published” means just that. Wine and distiller's yeast makers rarely publish attenuation — it is a brewer's number, measured on wort — so Lallemand and Fermentis give no attenuation figure for EC-1118, K1-V1116, the DistilaMax strains, or DADY. The table leaves those cells blank of invention rather than filling them with a guess.
Two tolerance figures could not be verified. Lallemand's own brochure publishes no alcohol tolerance for DistilaMax DS, and the secondary claims disagree: one retailer lists 20% while a Lallemand distributor catalogue lists 15%. The Fermentis spec sheet for DADY likewise gives no tolerance figure, while retailers claim anything from 15% to 18%. Both cells read “not published”; treat any single number you see elsewhere for these two strains with suspicion.
Temperature ranges are not all the same kind of range. Some are the maker's full working range (EC-1118, K1-V1116), some are the ideal range (US-05, 18–26 °C), and the turbo yeasts quote air temperature around the fermenter rather than the wash itself — a turbo wash runs several degrees hotter than the room. The baker's yeast figures are baking-literature ranges for dough fermentation, not a datasheet strain, and its alcohol tolerance is the least certain number on the page: most baking sources put it at roughly 5–8%, though some report higher.
Turbo yeast is a package, not a strain. Classic 8 and Alcotec 48 are dried yeast blended with nutrients, vitamins and minerals, sold to hit a target ABV on a schedule. The high-alcohol recipe takes days, not hours, and the wash benefits from carbon treatment before distilling — the speed comes with congeners.
Enzyme doses are product-specific. The dose column names the product each dose belongs to, because enzyme strength varies by brand and batch: a dose quoted for Termamyl SC DS does not transfer to another alpha-amylase. Glucoamylase has two very different working temperatures depending on how it is used — hot and alone for saccharification, or cool alongside the yeast in simultaneous saccharification and fermentation (SSF) — so the table gives the SSF figures a home distiller is most likely to use and notes the standalone optimum.
Alcohol tolerance is a ceiling, not a target. A strain rated to 18% will only get there with enough sugar, enough nutrients, and a temperature inside its range. Pitching a 9–11% ale yeast into a wash built for 15% will stall it, and pushing any strain to its limit stresses it into off-flavours. Pick the strain for the wash you are actually making.
Sources
- Lallemand Wine, Lalvin EC1118 technical data sheet (May 2024) — temperature 10–30 °C, alcohol tolerance up to 18%. products.lallemandwine.com
- Lallemand Brewing, Lalvin ICV K1-V1116 product page — temperature 10–35 °C, alcohol tolerance up to 18%. lallemandbrewing.com
- Lallemand Biofuels & Distilled Spirits, DistilaMax craft distilling brochure (2020) — DistilaMax DS optimal conditions 25–33 °C, pH 3.8–5.2; DistilaMax HT 25–37 °C. scottlabsltd.com
- Lallemand Biofuels & Distilled Spirits, DistilaMax HT technical data sheet (2013) — ferments well up to 37 °C, actively ferments above 16% alcohol, pH 3.5–6.0. ketelkraal.co.za
- Fermentis, Distillers Active Dry Yeast (DADY) specification sheet via BSG Canada — fermentation temperature 30–32 °C, maximum yields under controlled temperatures below 32 °C; no alcohol tolerance published. bsgcanada.com
- Still Spirits, “Turbo Yeast Range” (Help Centre) — Classic 8 turbo yeast: up to 20% ABV; operational air temperature 18–30 °C on the 6 kg recipe and 16–25 °C on the 8 kg recipe. help.stillspirits.com
- Hambleton Bard / Turbo Distillers Yeast, “All About Distillers Yeast and Turbo Yeast” — Alcotec 48 ferments a sugar wash to 14% in 48 hours or 20% in 5–6 days. turbodistillersyeast.com
- Fermentis, SafAle US-05 product page and technical data sheet — ideally 18–26 °C, apparent attenuation 78–82%, alcohol tolerance 9–11%. fermentis.com
- White Labs catalogue — WLP099 Super High Gravity Ale Yeast: attenuation 80–100%, optimum fermentation temperature 65–68 °F (18–20 °C), can ferment up to 25% alcohol with step-feeding. whitelabs.com
- Clarigo, “How Does Yeast Work?” — baker's yeast most active at 75–95 °F (24–35 °C). clarigo.org
- Winemaker's Corner, “Wine Yeast vs Bread Yeast” — bread yeast alcohol tolerance typically 5–8%. winemakerscorner.com
- Novozymes, Termamyl SC DS product data sheet via Mates Rate Home Brew Supplies — working temperature 45–95 °C, working pH 3.5–8.5, dosage 0.15–0.25 kg/ton adjunct (0.13–0.22 mL/kg grist). matesratehomebrewsupplies.com.au
- PGRO, “Optimised processing of faba bean kernels as a brewing adjunct” — Novozymes enzyme optima: Termamyl 120 L alpha-amylase 85–95 °C, pH 6.0–6.5; AMG 300 L glucoamylase 75 °C, pH 4.0. pgro.org
- Novozymes, “Enzyme Applications for the Fuel Ethanol Industry” — Spirizyme Fuel glucoamylase in SSF: dosage 0.046–0.066% w/w, pH 3.5–4.5, 30–35 °C. powershow.com
- Lallemand, Lallzyme EX-V technical data sheet (April 2022) via MoreWine — dosage 1.5–2.0 g/100 kg above 20 °C, 2.0–3.0 g/100 kg at lower temperatures; low-temperature tolerance 12 °C. morewine.com
- Novonesis, Pectinex Ultra Clear — optimum temperature 25–40 °C, typical dosage 20–50 mL/1,000 L juice. novonesis.com
- Nutrazym, pectinase enzyme specification — activity temperature 20–60 °C, optimum 45–52 °C; activity pH 3.0–6.8, optimum pH 3.0–5.0. nutrazym.com
- USDA Hop Variety Manual (March 2011 update) — alpha-acid ranges for 41 American-grown varieties. idahohops.org
- Mile Hi Distilling, DistilaMax DS product page — retailer claim of 20% alcohol tolerance, conflicting with the Lallemand distributor catalogue figure of 15%; cited only to document the disagreement. milehidistilling.com