Fermentable Sugars: Efficiency & Cost

Five sugars, one wash — which is the cheapest way to your target strength? This tool works from the Carbohydrate Efficiency Chart in the distiller charts included with the Moonshiner's Test Kit: the grams of each sugar per litre for each 1% of ABV, checked against the stoichiometry. Enter your batch size, target strength and fermentation efficiency, put in the prices you actually pay, and the table shows how much of each sugar you need, what the batch costs, and which sugar is cheapest per litre of pure alcohol. Below that, the yeast table does the same comparison for four strains.

Final wash volume. 23 L is the standard batch the chart is written for.
How strong the finished wash should be.
How much of the theoretical yield the yeast actually delivers. The chart's own figures imply 86%; 85–90% is a healthy ferment.
Pure alcohol at target—
Cheapest sugar—

Sugar comparison

SugarChart g/L per 1% ABVSugar neededExpected OGPrice per kgCost per batchCost per litre of pure alcohol
Sucrose (table sugar) 17 — — — —
Dextrose (glucose monohydrate) 18 — — — —
Maltose 18 — — — —
Glucose (anhydrous) 18 — — — —
Fructose 18 — — — —

Prices are examples — enter what you actually pay.

Yeast strains

StrainMax ABVMax pure alcohol at your volumeCost per pitchCost per litre of alcoholNote
Baker's yeast 5% — —
Brewer's yeast (SafAle US-05) 10% — —
Wine yeast (Lalvin EC-1118) 18% — —
Turbo yeast (48 hr) 22% — —

Max pure alcohol assumes the wash has enough sugar and the ferment actually reaches the strain's ceiling. Cost per litre spreads the pitch price over that maximum. Prices are examples — enter what you actually pay.

How the numbers are worked out

The chemistry. The yeast reaction is a fixed one: each glucose molecule breaks down into a pair of ethanol molecules and a pair of carbon dioxide molecules. Working from the molecular weights, glucose converts to ethanol at a ceiling of 511 grams per kilogram — fructose matches it exactly, since the two sugars share a chemical formula. Sucrose and maltose, the disaccharides, reach a higher ceiling of about 538 grams per kilogram: joining two sugar units sheds a water molecule, and yeast gives that water back when it splits the pair apart. To make one litre of pure alcohol at 86% efficiency takes 0.789 kg of ethanol, which needs 1.70 kg of sucrose — that is where the familiar rule comes from: roughly 17 grams of sucrose in each litre for every 1% of ABV.

The efficiency input. No ferment reaches the ceiling: yeast diverts some sugar into growing new cells and into side products such as glycerol, so a healthy run lands around 85–90% of the theoretical figure. The chart's own figures imply 86%: 5.865 kg of sucrose in 23 L at 15% ABV works out to 86.2% of theoretical. Lower the efficiency for a stressed, cool, or under-pitched ferment, and the sugar needed rises to match.

Prices are yours. The chart's dollar figures are years out of date, so every price on this page is an input. The pre-filled prices are examples, not quotes — put in what you actually pay and the cheapest sugar may change. The $ sign is just a label for whatever currency you enter.

Maltose, grouped. The chart groups dextrose, maltose and glucose together at 18 g/L. The computed column treats maltose as a disaccharide (538 g/kg), so it comes out near 17 g/L at 86% efficiency — a little less sugar than the chart's grouped figure. The difference is small and in the safe direction.

Yeast. A strain's maximum pure alcohol is your batch volume times its maximum ABV — the most alcohol that strain can produce before it stalls. The cost per litre spreads the pitch price over that maximum, so a cheap strain with a high ceiling looks best on paper. A strain flagged as too weak for your target will stall before reaching it: pick a stronger strain, or lower the target.

See also: Fermentable Sugars, Sugar & Gravity Converter, Sugar Wash Calculator, Wash ABV from Hydrometer, Yeast Pitching Calculator, Grain Bill & Mash Calculator.