Glass hydrometer measuring clear liquid in a laboratory bottle

Potato Vodka Wash

Potato vodka is the hard way to make vodka — and that is the point. Potatoes carry far less fermentable sugar per kilo than grain or molasses, they demand cooking, mashing, and enzymatic conversion, and the yield is modest. What you get for the trouble is a smooth, full-bodied spirit with a subtle earthy sweetness that sugar vodka never has.

Intermediate Time: ~7 days fermenting, plus a mash day   Yield: ~9–10% ABV wash   Batch: 25 L

Before you start: read the Safety guide first. Fermentation itself is low-risk, but everything this wash is destined for involves flammable vapour, high temperatures, and — in many places — legal restrictions; the Legality guide explains the legal picture. This recipe assumes you have already made a sugar wash and are comfortable with a hydrometer and a long mash day.

The honest case against potato vodka should come first, because every published recipe makes it. A potato is about 80% water and only about 17% starch, with a couple of percent of protein and odds and ends making up the rest — so a kilo of potatoes holds roughly a sixth of a kilo of starch, and that starch is locked inside cell walls that have to be broken open by cooking before any enzyme can touch it. Potatoes also carry no enzymes of their own: unlike malted barley, they cannot convert their own starch, and no amount of sprouting will change that — sprouted potatoes have simply spent some of their starch staying alive, which is why every source insists on fresh, unsprouted stock. The classic HomeDistiller potato vodka write-up is unsparing about the effort involved, and puts the cost at about 10 lb of potatoes for each litre of finished 100-proof spirit. Go into this recipe with your eyes open: it is a labour of love, not an efficient way to make alcohol.

That said, the method itself is straightforward once you understand its three jobs. First, cook the potatoes until they fall apart, which bursts the starch cells open — gelatinisation. Second, hold the cooked mash with malted barley and glucoamylase at conversion temperature so the enzymes turn that starch into fermentable sugar. Third, strain, ferment, and distil like any other wash. This recipe follows the small-batch method published by How To Distill, scaled from its 5-gallon batch to 25 L, with notes from the HomeDistiller community's longer experience of where potato mashes go wrong.

Change the batch size and every ingredient below scales with it.

Ingredients

Method

  1. Scrub the potatoes clean and chop them into pieces about 3–5 cm across. Peeling is a matter of taste and method: the recipe this page follows leaves the skins on, while the HomeDistiller classic-vodka method peels them, because skins get in the way of smashing by hand. If you are mashing mechanically, leave them on; if you are doing it by hand, peel.
  2. Put about 20 L of water in a large kettle — at least 30 L capacity for this batch — and bring it to the boil. Add the potatoes and boil for about 45 minutes, stirring often once they soften, until they are completely tender and break down into a thick, porridge-like slurry with no chunks left. This is the gelatinisation step: the starch cells swell and burst, which is what makes the starch available to the enzymes later.
  3. Reduce the heat until the mash sits at about 65 °C (149 °F), then stir in the crushed malted barley, mixing well so no dry clumps survive. Add the glucoamylase at the same time. The malt alone can do the conversion, but the added enzyme finishes the job more completely.
  4. Hold the mash between 65 °C and 66 °C (144–150 °F) for 90 minutes, stirring now and then. During the rest the thick mash thins noticeably as the enzymes turn starch into sugar. If you want proof the conversion is done, test a spoonful of cooled liquid with a drop of iodine: brown means the starch has converted, blue-black means it has not, and the mash needs more time.
  5. Strain the mash through a very fine mesh sieve or a straining bag into the fermenter, rinsing the solids with up to 10 L of water trickled over them, until you reach 25 L total. Press the mash out as you go — it stiffens as it cools, and the milky liquid it holds is where the sugar is.
  6. Check the gravity. You are aiming for 1.070–1.080. If the reading is above that, you collected less than the full volume or converted very efficiently, and you will get a stronger wash. If it is below 1.070, the mash was less efficient or over-diluted; if it is below 1.050, the recipe's author suggests dissolving in 1–2.5 kg of sugar to lift it, or simply accepting a much smaller return from the run.
  7. Cool the wash to about 27 °C (80 °F), stir in the yeast nutrient, and pitch the yeast at the temperature its packet recommends. Fit an airlock and leave generous headspace — potato mashes foam heavily, and a plugged airlock is a real risk. Keep the ferment in the yeast's recommended temperature range.
  8. Ferment for about 7 days, or until the gravity drops below 1.000 and the airlock is quiet. Then let the wash settle for 48 hours before distilling, so the fine solids drop out.

Expected results

A wash starting at 1.070–1.080 and finishing below 1.000 comes out at roughly 9–10.5% alcohol by volume — use the wash ABV calculator with your own readings. How To Distill estimates about 1 gallon of 80-proof vodka from its 5-gallon batch, which scales to roughly 5 L of finished 40% vodka from this 25 L wash, after a stripping run and a slow spirit run through a reflux column. Treat that as the good-outcome figure: other makers report much lower returns, and the range is wide. The HomeDistiller classic-vodka method, which extracts the starch without cooking the mash, expects a wash of only 5–6% ABV, and one maker's careful four-batch attempt at a boiled potato mash landed at 1.033 starting gravity and 3–3.5% ABV. The difference is almost entirely conversion efficiency — how much of the potato starch actually became sugar — which is why the gravity reading in step 6 matters more here than in any sugar wash. A realistic expectation for a first attempt is somewhere between 3 and 5 L of finished 40% vodka; if your gravity came in at the top of the range, expect the top of the range.

For the spirit run itself, the recipe's author dilutes the low wines to 40% ABV or below, discards the first 50 mL as foreshots, collects heads until the solvent and acetone notes fade (about 100–200 mL), then collects hearts in small jars until wet-cardboard and vegetal tails notes appear. A third distillation, or a pass through activated carbon, is the usual route to a truly neutral vodka; without it, expect a clean spirit with a mild, creamy sweetness and a trace of earthiness. Proof to 40% with filtered water and let the bottles rest at least a week before judging them.

Tips

Sources