Ripe dark purple grapes hanging on the vine

Apple Brandy Wash

Apple brandy starts as nothing more than fermented apple juice — a hard cider, made to be distilled rather than drunk. This wash uses store-bought or pressed juice, a little added sugar to lift the gravity, and a wine yeast that ferments clean and cool.

Intermediate Time: 7–14 days fermenting, plus resting   Yield: ~8.5% ABV wash   Batch: 25 L

Before you start: read the Safety guide first. Fermentation itself is low-risk, but everything this wash is destined for involves flammable vapour, high temperatures, and — in many places — legal restrictions; the Legality guide explains the legal picture. This recipe assumes you can read a hydrometer and keep a fermenter clean.

There are two schools of apple brandy, and it is worth knowing which one this recipe belongs to before you start. The purist school, championed on the HomeDistiller forums, holds that the best brandy wash is apple juice, yeast, and time — nothing else. No sugar, no sulfites, no shortcuts. The other school, followed here and based on Clawhammer Supply's tested apple brandy recipe, adds a modest amount of cane sugar — chaptalisation, in wine terms — to raise the starting gravity from the roughly 1.050 of plain juice up to 1.065. The sugar buys you a stronger wash, about 8.5% alcohol instead of about 6.5%, and therefore more brandy per batch; what it costs is a little of the purity the purists prize, since every gram of added sugar dilutes the apple character slightly. Both approaches work, and the choice is yours: if you skip the sugar entirely, simply ferment the juice as it stands and expect a weaker wash. The method below is written for the chaptalised version, and the expected-results section gives the numbers for both.

One more thing to settle before you begin: where the juice comes from. Fresh-pressed sweet cider from an orchard is the best starting point, pasteurised sweet cider is next, and ordinary store-bought apple juice last — makers who have tried all three report that juice from the shelf gives a noticeably thinner brandy than juice from a press. Pressing your own is a serious undertaking: it takes roughly 16 lb (7.3 kg) of apples to make a single gallon of juice, so a 25 L batch needs something like 100 lb (45 kg) of fruit. If you do press, mix varieties and include some sour or bitter cooking apples — the unglamorous fruit makes the most interesting brandy. Whichever juice you use, check the label: it must contain no preservatives other than citric acid. Sorbate and benzoate are added to juice precisely to stop yeast from growing, and they will do exactly that to your ferment.

Change the batch size and every ingredient below scales with it.

Ingredients

Method

  1. Sanitise the fermenter, airlock, and anything else that will touch the juice. Pour the juice into the fermenter, holding back a litre or two in a pot.
  2. Warm the reserved juice gently — it only needs to be hot enough to dissolve sugar, not boiling — and stir in the cane sugar until it is fully dissolved. Pour the sweetened juice back into the fermenter and mix well.
  3. Check the gravity with a hydrometer — the target is 1.065. Undiluted juice at around 1.050 needs roughly 1 kg of sugar in a 25 L batch to get there; if your juice was diluted during pressing, you may need considerably more — in Clawhammer's tests, diluted juice needed 4–10 lb of sugar for a 5-gallon batch to reach the same target. Add sugar a little at a time and re-check; the hydrometer is the authority, not the bag.
  4. If you are using pectic enzyme, stir it in now, following the packet directions. It breaks down the pectin that makes apple juice hazy, and a clearer wash is an easier wash to rack and run.
  5. Let the wash cool to about 21 °C (70 °F). Rehydrate the wine yeast according to its packet, then pitch it into the fermenter and stir in the yeast nutrient.
  6. Fit the airlock and leave the wash somewhere cool and dark, around 19–21 °C (67–70 °F). Leave generous headspace in the fermenter — yeast ferments apple vigorously, and the foam can be enthusiastic, especially with unpasteurised cider.
  7. Fermentation should take 7–14 days; in Clawhammer's tests at 67–70 °F it finished in 7–10. It is done when the airlock is quiet and the gravity has settled at or just below 1.000 for a couple of days.
  8. Rack the finished cider off its sediment into a clean vessel, filled nearly to the top to minimise airspace, and let it rest. A month of resting is a good minimum, and the HomeDistiller recipe's author rests his cider for a month after a 30-day ferment — sometimes far longer — before running it. If any infection shows up during the rest, run the batch sooner rather than later.

Expected results

With the sugar added, the wash starts at 1.065 and finishes at about 1.000, giving roughly 8.5% alcohol by volume — the figure Clawhammer reports for this recipe, and the figure the (OG − FG) × 131.25 rule gives for those gravities. Without the sugar, plain juice at about 1.050 ferments out to roughly 6.5% ABV. Either way, run your own readings through the wash ABV calculator instead of taking these figures on trust.

A 25 L wash at 8.5% holds about 2.1 L of pure alcohol. Clawhammer's rule of thumb for apple brandy is that a gallon of cider yields about a pint of brandy, which works out to roughly 3 L of finished brandy at 40% from this batch after a double distillation and careful cuts — a reasonable expectation, though your own recovery will depend on how much of the heads you keep for flavour and how deep into the tails you go. Apple brandy is usually run twice: a stripping run first, then a slow spirit run, often through a simple pot still, since the apple character sits mostly in the heads and a tall reflux column compresses them so tightly that the flavour becomes hard to put back together.

Tips

Sources