
Sugar Scales: Brix, Plato, Oechsle & Baumé
Ask five fermenters how sweet a wash is and you may get five different numbers — 20 Brix, 20 Plato, 83 Oechsle, 11 Baumé, or a specific gravity of 1.083 — all describing the same liquid. The sugar scales grew up in different trades and different countries, and each one measures the same thing through a different lens. Once you know what each scale actually counts, converting between them is straightforward, and you will stop mistaking one for another.
Why so many scales
Every sugar scale is an answer to the same practical question: how much sugar is dissolved in this liquid? Dissolved sugar makes a liquid denser than water and bends light passing through it more sharply, so both density and refraction can stand in for sugar content. But brewers, winemakers, and sugar refiners each developed their own way of expressing the answer, in different centuries and different countries, and the scales have never been consolidated. A distiller meets most of them eventually: recipes quote Brix, European winemaking texts use Oechsle, brewing literature uses Plato, and old books of all kinds use Baumé.
The good news is that the scales fall into two families. Brix, Balling, and Plato all express sugar as a percentage by weight, and for practical purposes they are the same number. Oechsle and Baumé are density scales dressed up as sugar scales, and they need a conversion. Specific gravity sits underneath all of them as the common language — see our hydrometer guide if you want the full picture of how gravity readings work.
Brix
Degrees Brix (°Bx) is the most widely used sugar scale in the world, named after the German scientist Adolf Brix, who developed it in the 19th century. One degree Brix means one gram of sucrose dissolved in 100 grams of solution: a juice reading 20 °Bx has the same density as a solution of 20 grams of sugar in 100 grams of water. The scale is calibrated on sucrose, but in practice it reads all dissolved solids — other sugars, acids, and minerals all contribute — so in a fruit juice or a wash, Brix is best understood as “total dissolved solids, expressed as if they were sucrose.”
Brix is the home scale of winemakers, fruit growers, and juice makers, and it is the scale printed on most handheld refractometers. It also gives a quick estimate of the alcohol a must can produce: multiply the Brix by about 0.55 to 0.60, and you have the rough potential alcohol by volume — so grapes at 22 °Bx will make roughly a 12–13% wine. That factor is an estimate, not a promise: it assumes the yeast ferments the must dry, and real yields vary with strain and conditions.
Balling
The Balling scale predates Brix and was the standard of the brewing world in the 19th century. Like Brix, it expresses sugar as a percentage by weight of sucrose in water, and it was built from slightly different laboratory tables. The two scales agree so closely that the difference is invisible on any instrument a home fermenter owns — the conversion factor between them is 1.0008, meaning 25 °Bx is about 25.02 °Balling. Balling survives today mainly in older brewing texts and in South African brewing; everywhere else, Brix or Plato has taken its place. If a recipe says Balling, read it as Brix and carry on.
Plato
Degrees Plato (°P) is the scale of the professional brewing world, especially in Europe. Like Brix and Balling, it expresses extract — sugars and other dissolved solids — as a percentage by weight. A wort of 12 °P contains 12% dissolved extract by weight. Plato and Brix were built from slightly different reference tables, so they differ only far past the decimal point: for any practical job, 12 °Bx is 12 °P, and a recipe written in one can be read in the other without conversion. The distinction matters only to laboratories and to pedants — which, in brewing, is sometimes the same thing.
The Brix–Plato confusion
A persistent piece of misinformation claims that Plato equals Brix multiplied by 1.04, so that 25 °Bx would be 26 °P. That is wrong, and the error has a traceable origin: 1.04 is the wort correction factor for refractometers, not a conversion between scales. Handheld refractometers are calibrated against pure sucrose solutions, but wort contains maltose, dextrins, and proteins, which bend light more per unit of extract than sucrose does — so a raw refractometer reading on wort runs about 4% high, and dividing by 1.04 corrects it. The factor belongs to the instrument and the liquid, not to the scales. Brix and Plato, measured on the same sample with the same instrument, are effectively identical.
Oechsle
Degrees Oechsle (°Oe) is the winemaker’s scale of Germany, Switzerland, and Luxembourg, named after its inventor, Ferdinand Oechsle, a mechanic from Pforzheim. Unlike Brix, Oechsle does not count sugar directly — it counts density. The traditional definition, still used in Luxembourg and Switzerland and known in Germany as “old” Oechsle, is simply the gravity points of the must:
°Oe = 1000 × (specific gravity − 1)
So a must with a specific gravity of 1.083 reads 83 °Oe. The scale is used mainly to classify German wines: the Prädikat system grades wines by the must weight of the grapes at harvest, and those grades are defined in Oechsle. Germany’s current official Oechsle scale is defined instead by refractive index rather than density, which gives very slightly different values, but the old density definition remains the one most home winemakers meet, and the two agree closely across the normal range. As a rough guide, one degree Brix is worth about four degrees Oechsle.
Baumé
The Baumé scale (°Bé) is the oldest of the group, devised by the French chemist Antoine Baumé in the 18th century. It is a hydrometer scale, and it comes in two versions — one for liquids heavier than water, one for lighter — that run in opposite directions, which is a reliable source of confusion. Only the heavy-liquid version is used in winemaking and fermenting: 0 °Bé is pure water, and 15 °Bé is the reading of a 15% salt solution. The conversion from specific gravity is:
°Bé = 145 − (145 ÷ specific gravity)
Baumé survives mainly in French, Spanish, and Australian winemaking, and it has one charming convenience: the Baumé number of a grape juice is close to the alcohol percentage of the wine it will make. A juice at 13 °Bé will ferment into a wine of about 13% ABV. That is an approximation — it works because the sugar-to-alcohol arithmetic happens to land near the Baumé arithmetic — but it is a handy one at harvest time, and it is the main reason the scale refuses to die.
Conversion table
Each row below is the same liquid expressed five ways. The specific gravity, Oechsle, and Baumé figures follow from the formulas above; the potential alcohol assumes the sugar ferments dry, at roughly 0.55–0.60% ABV per degree Brix.
| Brix / Plato | Specific gravity | Oechsle | Baumé | Potential alcohol |
|---|---|---|---|---|
| 10 °Bx | 1.040 | 40 °Oe | 5.6 °Bé | ~5.5–6% |
| 15 °Bx | 1.061 | 61 °Oe | 8.3 °Bé | ~8–9% |
| 20 °Bx | 1.083 | 83 °Oe | 11.1 °Bé | ~11–12% |
| 25 °Bx | 1.106 | 106 °Oe | 13.9 °Bé | ~14–15% |
| 30 °Bx | 1.129 | 129 °Oe | 16.6 °Bé | ~17–18% |
For values between the rows, or for conversions the table does not cover — including the Austrian KMW scale, which runs about 0.83 times the Brix value — use the sugar gravity calculator rather than interpolating by hand.
Quick rules of thumb
When you need an answer in your head rather than on a calculator, these approximations are accurate enough for recipe work:
- Gravity points ÷ 4 ≈ Brix or Plato. A gravity of 1.048 is 48 points, and 48 ÷ 4 is 12 — so about 12 °Bx. The rule drifts at high gravities (at 1.100 it says 25 where the true value is about 24), so use the exact conversion for strong washes.
- Brix ÷ 1.8 ≈ Baumé. A 22 °Bx juice is about 12 °Bé. Going the other way, multiply Baumé by 1.8 to get Brix.
- Oechsle ≈ gravity points. By definition, on the old scale — 1.083 is 83 °Oe, no arithmetic required.
- Brix × 0.55–0.60 ≈ potential ABV. The factor varies with yeast and conditions; use 0.55 for a conservative estimate.
- Brix = Plato = Balling, for every practical purpose. Do not convert between them.
Hydrometer vs refractometer
The two instruments measure sugar in different ways, and each has a weakness the other does not share. A hydrometer floats in the liquid and reads density directly. It needs a fair-sized sample, it is sensitive to temperature — most are calibrated at 20 °C (68 °F), and a warm sample reads low — and it must be spun to shake off carbon dioxide bubbles, which lift the stem and fake a high reading. But it stays honest after fermentation starts: alcohol changes the density in a predictable way, and the gravity drop from start to finish is still the most reliable measure of how much sugar became alcohol. Our temperature correction calculator handles the temperature part.
A refractometer measures how much light bends as it passes through a drop of liquid, and it needs only that drop — a real advantage when you are testing a small batch or checking fruit in the field. Its weaknesses are twofold. First, it is calibrated for sucrose, so on wort — which is mostly maltose — it reads about 4% high unless you divide by the wort correction factor of 1.04. Second, once alcohol is present, the reading is distorted, because alcohol bends light far more strongly than sugar does: a refractometer will read too high on a fermenting sample, and the error grows as the alcohol rises. Correcting a fermented sample is possible — the standard approach uses the original gravity and a published regression, such as Terrill’s cubic equation — but the correction is a statistical fit, not a measurement, and it is at its best near the end of fermentation. For a final gravity you intend to act on, confirm it with a hydrometer.
The practical division of labour: use the refractometer for quick checks on unfermented must — harvest ripeness, a sugar wash before pitching — and the hydrometer for tracking a ferment and for any final reading. If the two disagree on an unfermented sample, check the refractometer’s calibration with distilled water (it should read zero) and the hydrometer’s in the same water (it should read 1.000).
Which scale should you use
Use the scale your recipe and your instruments already speak. For most home distillers that means specific gravity for the wash and Brix for the refractometer — gravity because the alcohol calculations in the wash ABV calculator start from it, and Brix because that is what a refractometer dial shows. Learn Plato if you brew beer from European recipes, Oechsle if you make wine from German texts, and Baumé if you read old French or Australian sources — but you never need to convert your own working notes into a scale you do not use. The sugar does not care what you call it; only the arithmetic matters, and the arithmetic is the same underneath.
Sources
- FermCalc, “Unit Conversions” — Brix is virtually identical to the Balling and Plato scales; old Oechsle is 1000 × (SG − 1); the new German Oechsle scale is defined by refractive index; Baumé for liquids heavier than water is 145 − 145/SG, devised by Antoine Baumé; conversions are valid only before fermentation. fermcalc.com
- ABV Calculator, “Specific Gravity vs Plato vs Brix” — Brix and Plato differ only far past the decimal point and can be treated as equal; Plato or Brix ≈ gravity points ÷ 4; Baumé ≈ Brix ÷ 1.8; a 13 °Bé juice makes a wine of about 13%. abvcalculator.org
- Grape Growing Guide, “Brix to Alcohol Calculator for Wine” — potential alcohol is roughly Brix × 0.55–0.60; conversion table (20 °Bx = 1.083 SG = 83 °Oe = 11.1 °Bé; 25 °Bx ≈ 1.106 SG ≈ 106 °Oe ≈ 14 °Bé). grapegrowingguide.com
- Fruit Hill Farm, “Refractometer Instructions” — Brix named after Adolf F. Brix (1798–1870); Oechsle named after Ferdinand Oechsle; 1 °Bx ≈ 4 °Oe; KMW used in Austria. fruithillfarm.com (PDF)
- Beerwright docs, “Hydrometer and refractometer corrections” — refractometers are calibrated against sucrose and wort reads about 4% high (wort correction factor 1.04); once alcohol is present a refractometer reading needs a model based on original gravity (Terrill’s regression); hydrometers read low in warm samples. docs.beerwright.com
- Brainscape, “Module 2: Units of density” — Oechsle = (specific gravity − 1) × 1000; °Brix = 1.80 × °Baumé. brainscape.com