Pot Still Yield Calculator

How much will a pot still run give you? Start with the alcohol in the wash — a 23 L wash at 10% holds 2.3 L of pure alcohol, and no still can give you more than that. The rest depends on how much of it you recover and at what strength it comes off.

Volume in the boiler at the start of the run.
Strength of the wash, from your hydrometer readings.
Share of the wash alcohol you expect to collect. 90% is realistic for a strip run; lower if you cut hard for heads and tails.
Total extractable alcohol—
First-drops strength—
Wash boiling point (sea level)—
Distillate at first-drops strength (theoretical, 100% recovery)—
Distillate at first-drops strength (at your recovery)—
Left in the boiler (approx.)—

How it works — and its limits

The maths. Pure alcohol = wash volume × ABV ÷ 100. The first-drops strength comes from the ethanol–water vapour–liquid equilibrium curve: a 10% wash gives vapour of about 55%. Dividing the pure alcohol by that strength gives the distillate volume if every drop came off at the starting strength.

Why reality differs. It won't. As the run goes on the boiler weakens, so the vapour weakens too — the average strength of everything you collect is lower than the first drops, and the volume is correspondingly larger. The figures above are therefore a lower bound on volume and an upper bound on strength: a useful planning number, not a promise. How far you run it (when you stop collecting) matters more than anything else — see the Strip Run Planner for a run planned around a target average strength instead.

Assumptions: a simple pot still with no reflux, a binary ethanol–water wash (congeners and dissolved solids ignored), and sea-level pressure for the boiling point.

See also: Strip Run Planner, Boiling Point Calculator, Pure Alcohol & Bottle Count.