Boiling Point Calculator
A wash does not boil at 100 °C — the alcohol in it drags the boiling point down. A 10% wash boils at about 92 °C, and as the run goes on and the boiler weakens, the temperature climbs towards 100 °C. That climbing thermometer is one of the best guides you have to what is left in the boiler.
How it works
Sea-level boiling points come from the ethanol–water vapour–liquid equilibrium curve (Wilson-equation model, Perry's Chemical Engineers' Handbook, checked against Gmehling & Onken): pure water 100 °C, pure ethanol 78.37 °C, and the azeotrope — 95.6% ethanol by weight — at 78.15 °C, the lowest boiling point of any ethanol–water mixture. That is why no ordinary still can push past about 95.6%.
For altitude, pressure comes from the standard barometric formula and the boiling point is shifted with the Clausius–Clapeyron relation. It matches the published water table closely: at 1,000 ft water boils at 98.9 °C, at 9,000 ft at 90.6 °C.
Reading the run: the vapour strength is what condenses first from a boiler at this strength — a 10% wash gives first drips of about 55%. As the run proceeds the boiler weakens, the temperature rises, and the vapour weakens with it. When the vapour temperature approaches 99 °C at sea level, there is almost no alcohol left to collect.
Thermometer placement matters. A thermometer in the boiler reads the liquid temperature; one at the top of the column reads the vapour temperature, which is lower and tracks the vapour strength. Don't mix the two up when judging cuts.
See also: Pot Still Yield, Strip Run Planner, Unit Converters.