
Gin: Botanicals & Vapour Infusion
Gin is the only major spirit whose flavour is added after the spirit is already made. A distiller starts with a clean neutral base, then coaxes the oils out of juniper and a dozen other botanicals by steeping, steaming, or both — and the method chosen matters as much as the recipe. Gin rewards experiment more than any other spirit, because a new botanical bill is a new gin in an afternoon.
What gin legally is
Every legal definition of gin turns on one botanical. In the European Union, Regulation (EU) 2019/787 defines gin as a juniper-flavoured spirit drink made by flavouring ethyl alcohol of agricultural origin with juniper berries (Juniperus communis L.), with a minimum strength of 37.5 percent ABV and a taste predominantly that of juniper. Distilled gin goes further: it must be produced by distilling ethyl alcohol of at least 96 percent ABV in the presence of juniper berries and other natural botanicals, with the juniper taste predominant. The strictest category, London gin, requires that all flavour come exclusively from redistillation in traditional stills with all the natural plant materials present, that the resulting distillate reach at least 70 percent ABV, that the base alcohol carry no more than 5 grams of methanol per hectolitre of pure alcohol, that nothing be added afterwards except water and more alcohol of the same quality, that it never be coloured, and that sweetening not exceed 0.1 grams per litre. "London" here describes a method, not a place — a London gin can be made anywhere.
The American definition is shorter but rests on the same point. Under 27 CFR § 5.144, gin is distilled spirits made by original distillation from mash, or by redistillation, or by mixing neutral spirits, with or over juniper berries and optionally other aromatics; it must derive its main characteristic flavour from juniper berries and be bottled at no less than 40 percent ABV. Gin made exclusively by original distillation or redistillation may be called "distilled" gin. Notably, the American rules permit gin to be aged in oak — the EU's London gin rules do not.
The neutral base spirit
Gin begins where vodka ends: with a clean, high-proof neutral spirit. Most gin distilleries — including some of the largest brands — buy their neutral spirit from specialist producers rather than making it themselves, because producing a truly neutral base at 96 percent ABV needs a tall reflux column and a great deal of energy. The base is usually distilled from grain — wheat, rye, barley, or corn — though potatoes, grapes, apples, molasses, and even milk whey have all been used.
For the home distiller, the base is normally a neutral spirit you have already made, following the approach in Vodka: The Neutral Spirit. Before the gin run, dilute that spirit down to roughly 40–50 percent ABV: at still strength the alcohol would extract the botanicals too aggressively and unevenly, and the lower proof gives a gentler, more controllable extraction. The base must be genuinely neutral — any heads or tails character left in it will ride straight through the gin run and sit underneath the botanicals, where no amount of juniper can hide it.
Juniper and the classic botanical bill
Juniper is the one botanical no gin can skip, and it must lead. Juniper berries — technically fleshy cones, not true berries — give gin its piney, resinous, faintly peppery backbone through the terpene pinene and related compounds. Everything else in the bill exists to support, frame, or contrast that juniper note. A classic bill is small: most fine gins use six to ten botanicals, though some use forty or more.
- Coriander seed is the second voice in almost every gin, adding warm, citrusy, slightly spicy notes through linalool. It is usually the largest supporting botanical by weight.
- Angelica root brings dry, earthy, musky depth, and its heavy compounds arrive late in the run, anchoring the finish.
- Orris root — the dried rhizome of the iris — contributes violet-like, powdery notes and acts as a fixative, helping the lighter aromas linger.
- Citrus peel, usually lemon and bitter orange, gives bright top notes through limonene; these are the first aromas to flash off in the still.
- Cassia and cinnamon bark, liquorice root, cardamom, and grains of paradise appear in various combinations for warmth, sweetness, and spice.
A useful starting ratio from home-distilling practice is to treat the juniper weight as the unit: coriander at about half the juniper, angelica, cassia, cinnamon, and liquorice each at about a tenth, and the small accents — citrus peels, orris, cardamom, ginger — at about a hundredth. Total botanical load runs roughly 20–35 grams per litre of spirit in the still. That ratio is a starting point, not a rule: crush the juniper lightly before use so the spirit can reach the oils, keep notes on every batch, and change one thing at a time — otherwise you will never know which botanical made the difference.
Maceration vs vapour basket vs vapour infusion
There are three ways to get botanical flavour into the spirit, and they give different gins from the same recipe.
Maceration (steep and boil) is the oldest method: the botanicals sit in the diluted base spirit, often for 12–24 hours, and then the whole charge is distilled together in a pot still. Steeping extracts flavour thoroughly and gives a rich, full, classic gin — Beefeater steeps for 24 hours before distilling. The trade-off is that delicate botanicals can be overcooked by hours of boiling, and the heavier, earthier notes dominate. Tanqueray, by contrast, distils without a steep at all, which shows how much of the method is a matter of house style rather than law.
Vapour basket keeps the botanicals out of the liquid entirely: they sit in a perforated basket in the still's neck or vapour path, and the rising alcohol vapour passes through them, picking up volatile oils on its way to the condenser. The result is lighter, brighter, and more floral, because the botanicals are never boiled. The best-known example is the Carterhead still, whose botanical basket in the vapour path gives Bombay Sapphire its light, citrus-forward character.
Vapour infusion is the same idea at a smaller scale: a gin basket suspended above the wash inside a pot still, or hung in the column, so that vapour extracts the botanicals as it rises. Vapour methods are less efficient than maceration at pulling flavour out, so they typically need more botanicals for the same intensity — but what they extract is cleaner and fresher. Many distillers use a hybrid: heavy roots and seeds macerated in the pot, delicate peels and flowers in the basket, so each botanical is treated the way that suits it best.
A fourth route, cold compounding, skips distillation altogether: botanicals or their extracts are simply steeped in finished neutral spirit. It is fast and cheap, and it is how many flavoured gins are made — but under EU rules it cannot be called distilled gin or London gin, and the result tends to be harsher and less integrated than a redistilled gin.
Cuts with botanicals present
Making cuts on a gin run is different from making cuts on a plain spirit run, because the botanical oils come across the still in a sequence of their own. The lightest aromas — citrus peel's limonene — flash off first, in the heads and early hearts. The middle of the run carries the juniper and coriander heart notes, pinene and linalool. The heavy root notes — angelica's and orris's sesquiterpenes — arrive late, with the tails. Cutting too early loses the bright top; cutting too late pulls in stewed, bitter, root-heavy notes that can overwhelm the juniper.
The foreshots cut still applies: discard the first fraction as always, since the base spirit's lightest compounds and any sharp extraction products come over first. Then collect in small jars and nose each one as it cools — gin is judged by aroma more than any other spirit, and the jars will tell you where the citrus gives way to juniper and where the juniper gives way to roots. Blend the jars that hold together as a gin, and set the extremes aside: early jars can be saved for blending into a citrus-forward batch, late jars are usually best left out. Never return botanical-laden feints to a neutral spirit run — the oils will follow them.
Dilution, louching, and bottling
Gin is diluted to bottling strength — 40 percent ABV or higher in the United States, 37.5 percent minimum in the EU — with clean, soft water, exactly as for vodka. Dilute gradually and let the spirit rest: a week or two of rest after dilution lets the botanical flavours settle and marry, and many gins taste noticeably better after that pause than they do on the day they are made.
One surprise awaits many first-time gin makers: the spirit may turn cloudy when it is diluted or chilled. This is louching, the same effect seen when water is added to ouzo or pastis. Botanical oils dissolve readily in strong alcohol but poorly in water, so as dilution lowers the ethanol concentration, the oils come out of solution as microscopic droplets that scatter light and turn the spirit milky. It is a physical effect, not spoilage — the gin is perfectly safe to drink — and it is a sign of a generous botanical load rather than a fault. It can be reduced by taking a larger heads cut, cutting the tails earlier, using vapour infusion rather than maceration, or bottling at a slightly higher strength; chill-filtering also removes the oils, at the cost of some aroma.
Bottle in clean glass, label the batch and the botanical bill, and keep your notes. Gin is the most repeatable spirit to make at home precisely because the variables are all in your hands — and the gin you love most is the one whose recipe you wrote down.
Sources
- Regulation (EU) 2019/787, Annex I, categories 20–22 — Gin, distilled gin, and London gin: juniper predominant, minimum 37.5% ABV, 96% ABV base for distilled gin, London gin's 70% ABV distillate floor, 5 g/hL methanol limit, 0.1 g/L sweetening limit, no colouring. eur-lex.europa.eu
- U.S. Code of Federal Regulations, 27 CFR § 5.144 — Gin: main characteristic flavour from juniper berries, bottled at not less than 40% ABV, "distilled" designation, oak aging permitted. law.cornell.edu
- Cocktail Society, "How Is Gin Made?" — neutral base spirit, four production methods, Beefeater's 24-hour steep, Tanqueray's no-steep approach, heads/hearts/tails on a gin run. cocktail-society.com
- Love Brewing, "Gin Recipes Using Botanicals" — botanical ratios (coriander at half the juniper, roots and spices at a tenth, accents at a hundredth), 20–35 g/L total load, maceration at 40% ABV for 24 hours, Carterhead still and vapour basket. lovebrewing.co.uk
- DIY Distilling, "How To Make Gin — A Complete Guide" — maceration vs vapour infusion, vapour infusion needing more botanicals, hybrid methods. diydistilling.com
- DIY Distilling, "What Is Louching?" — essential oils coming out of solution on dilution, temperature effects, prevention by vapour infusion and larger cuts. diydistilling.com