Dilution & Proofing Calculator
Most dilution calculators get this wrong. They use C₁V₁ = C₂V₂ and tell you that 1 L of 80% spirit plus 1 L of water makes 2 L at 40%. It doesn't — you end up with about 1.96 L at 40.8%. This calculator uses the OIML R22 alcoholometric density tables and a mass balance, so the contraction is accounted for and the answer is the one the excise tables give.
Why 1 + 1 ≠ 2: volume contraction
Ethanol and water molecules pack together more tightly than either does alone — the small water molecules fit into the gaps between the larger ethanol molecules, and hydrogen bonding pulls them closer. Mix 1 L of pure ethanol with 1 L of water and you get about 1.92 L, not 2 L. The shrinkage peaks around 45–50% ABV at nearly 4%.
That is why the naive formula fails: it assumes volumes add. The correct method works with mass, which is always conserved. The final volume is fixed by the ethanol (final volume = starting volume × starting ABV ÷ target ABV), and the water needed is the difference between the final mass and the starting mass, looked up from the density tables. This calculator uses the OIML R22 (1975) ethanol–water density table — the same tables behind the excise and TTB proofing tables — so 1 L of 80% to 40% comes out at 1.039 L of water, matching TTB Table 6.
Tip: weigh the water instead of measuring its volume — a kitchen scale is more accurate than a measuring jug, and the weight figure above is exact at any reasonable temperature. Add the water slowly, stir, and let the spirit rest: dilution releases heat and the mixture needs time to settle before a final hydrometer check.